Yokogawa Touch Screen GP20 - Manual (Page 6)

iv
IM 04L61B01-02EN
How to Use This Manual
Structure of the Manual
This manual contains the following three chapters.
Chapter Title and Description
1 Before Using the Product
Provides an overview of Hardware Configurator. It also explains the PC system requirements, how to start the software,
the screen configuration, and the menus.
2 Creating Setup Data
Explains how to display, create, edit, save, and print setup data as well as how to control the GX/GP using this software.
3 Troubleshooting
Provides a list of errors and messages.
Scope of This Manual
This manual does not explain the basic operations of your PC’s operating system. For this
information, read the Windows user’s guide or related materials.
Conventions Used in This Manual
Unit
K Denotes 1024. Example: 768K (file size)
k Denotes 1000.
Notes
Improper handling or use can lead to injury to the user or damage to
the instrument. This symbol appears on the instrument to indicate that
the user must refer to the user’s manual for special instructions. The
same symbol appears in the corresponding place in the user’s manual
to identify those instructions. In the manual, the symbol is used in
conjunction with the word “WARNING” or “CAUTION.”
WARNING Calls attention to actions or conditions that could cause serious or fatal
injury to the user, and precautions that can be taken to prevent such
occurrences.
CAUTION Calls attention to actions or conditions that could cause light injury
to the user or cause damage to the instrument or user’s data, and
precautions that can be taken to prevent such occurrences.
Note Calls attention to information that is important for the proper operation
of the instrument.
Reference Item
Reference to related operation or explanation is indicated after this
mark.
Example: section 4.1
Conventions Used in the Procedural Explanations
Bold characters Indicates character strings that appear on the screen.
Example: Volt
Procedure Carry out the procedure according to the step numbers. All procedures
are written under the assumption that you are starting operation at the
beginning of the procedure, so you may not need to carry out all the
steps in a procedure when you are changing the settings.
The explanation section describes limitations and related information
about the operation.
Explanation