Yokogawa Touch Screen GP20 - Manual (Page 49)

2-31
IM 04L61B01-02EN
Creating Setup Data
1
2
3
4
5
6
7
8
9
10
11
12
App
Index
2.7 Initializing Setup Data
If you change the setup data on this software, the changes are stored and will appear
the next time you start the software. If you want to view or change the current system
configuration, follow the procedure in section 2.7.1. If you change the system configuration,
the current setup data will be initialized. If you do not want to change the current system
configuration but want to just initialize the settings, follow the procedure in section 2.7.2.
2.7.1 Viewing and Changing the System Configuration
Procedure
1
On the main menu, click the System tab and then System Config.
The System Config. dialog box appears, showing the current system configuration.
2
If you just want to view the system configuration and not change it, click Cancel.
To change it, select the option or module that you want to change.
Click to
select a module.
Select whether these
options are available.
When you have
changed the items
click OK.
To not change, click Cancel.
Select the GX/GP firmware version. Click to select a model.
3
After you set the items, click the OK.
The system is reconfigured, and the setup items for the new system configuration will appear.
2.7.2 Initializing Setup Data
Procedure
1
On the main menu, click the System tab and then Initialize.
The initialization confirmation dialog box appears.
2
Click OK to initialize.
The settings are initialized to their defaults, which are the settings used for new setup data.