Yokogawa Touch Screen GP20 - Manual (Page 24)

2-6
IM 04L61B01-02EN
2.3 Editing Setup Data
2.3.1 Editing Settings
This section explains how to use Hardware Configurator to edit GX/GP's setup data (.gnl
extension).
The setup data editing and display features are the same as those of the Web application on
the GX/GP itself.
In addition, the setup items of this software are the same as those on the recorder.
Therefore, this section will only cover typical operations and the unique features of this
software.
Setup item details: Chapter 1 “Configuring the GX/GP” in the Models GX10/GX20/GP10/GP20
Paperless Recorder User’s Manual (IM 04L51B01-01EN).
Procedure
1
Display the file that you want to edit on the Setting tab.
Content
area
Content
selection tree
Setup item names
2
From the content selection tree, which is on the left side of the window, select the
name of the setup item you want to edit. (This example will show how to set DI
channels.)
Click +
to expand
the tree
and show the
next level.
Selecting an item
changes the content
display.
Content selection tree
(setup item names)
When you select a name, the relevant setup items are loaded in the content area, which is on the
right.
Note
Loading takes a certain amount of time, so a “processing” icon may appear. While this icon is
displayed, you cannot perform any operations.