Yokogawa Touch Screen GP20 - Manual (Page 39)

2-21
IM 04L61B01-02EN
Creating Setup Data
1
2
3
4
5
6
7
8
9
10
11
12
App
Index
2.5 Receiving and Sending Setup Data
You can receive setup data from the GX/GP and send setup data to the GX/GP. You cannot
send setup data when the recorder is recording or computing (you can send user settings).
Note
• Before exchanging setup data with a recorder, check the system configuration. If the configuration
between the recorder and the software is not the same, settings may not be set properly.
• If on the recorder, Security settings - Basic settings - Communication is set to Login, send data
using an administrator user name. Otherwise, a portion of the data such as security settings will
not be applied to the recorder.
2.5.1 Receiving Setup Data
Procedure
1
On the main menu, click the Setting tab and then Receive Settings.
A dialog box for entering communication information appears.
Select the
communication type
to use.
Set user information.
Enter text.
Select from the list.
2
Enter the information, and click OK.
A confirmation message for receiving data appears.
3
To start receiving, click OK.
Settings are received from the recorder and displayed. The file name display shows “NewFile.”