Yokogawa Touch Screen GP20 - Manual (Page 43)

2-25
IM 04L61B01-02EN
Creating Setup Data
1
2
3
4
5
6
7
8
9
10
11
12
App
Index
2.5.4 Changing the GX/GP’s Security Settings
Changing the GX/GP Communication Login Function from Off to Login
The procedure below is for enabling the GX/GP communication login function from Hardware
Configurator. Follow the procedure below to change the GX/GP’s Security settings - Basic
settings - Communication from Off to Login from the software via communication.
To change the GX/GP communication login function from Login to Off : 2.5.2 Sending Setup Data
Procedure
1
From the content selection tree, select Security settings - Security basic settings,
and set Communication under Security function to Login.
2
From the contents selection tree, select Security settings - User settings, and register a user.
3
On the Submenu, click Send User Settings to send the user information.
A dialog box for entering communication information appears.
Confirm the information, then click OK.
2.5 Receiving and Sending Setup Data