Yokogawa Touch Screen GP20 - Manual (Page 20)

2-2
IM 04L61B01-02EN
If you click Yes, a dialog box for saving the file (see the figure below) appears.
How to save files: 2.4 Saving Setup Data
If you select No, the System Config. dialog box, shown in step 4, appears.
4
Set the system configuration. Select the GX/GP options and the current module
configuration.
Click to
select a module.
Select whether these
options are available.
When you have
changed the items
click OK.
To not change, click Cancel.
Select the GX/GP firmware version. Click to select a model.
5
After you set the items, click OK.
The system configuration is loaded, and setup items based on the configuration are created.
2.1 Creating New Setup Data