Yokogawa Touch Screen GP20 - Manual (Page 53)

3-1
IM 04L61B01-02EN
Troubleshooting
1
2
3
4
5
6
7
8
9
10
11
12
App
Index
3.1 Errors and Messages
Message
Code Message Description and Corrective Action
M001 Save changes to xxx? File name confirmation.
M002 Receiving finished. Reception completed successfully.
M003 Sending finished. Transmission completed successfully.
M004 Recording started. The recorder started recording.
M005 Recording stopped. The recorder stopped recording.
M006 Computing started. The recorder started computing.
M007 Computing stopped. The recorder stopped computing.
Warning Messages
Code Message Description and Corrective Action
No code Input value is invalid. It is returned before the
change.
An invalid value may have been entered in a setup item.
Check the settings below.
• Expression
• IP address
• FTP connection
• SMTP or POP3 server password
• Password for the security setting operation lock or user
registration
W001 Receive settings from connecting hardware. Reception confirmation.
To continue, click OK. To cancel, click Cancel.
W002 Send settings to connecting hardware. If user
level is not “Admin”, some settings can not be
set on the device.
Transmission confirmation.
To continue, click OK. To cancel, click Cancel.
W003 Hardware and software configurations don't
match. Continue sending data?
Transmission confirmation.
To continue, click OK. To cancel, click Cancel.
W004 System configuration has been changed. The
input configuration and data will be initialized.
Continue?
If you change the system configuration, the displayed setup data
will be initialized.
To continue changing, click OK. To cancel, click Cancel.
W005 Overwrite the file? Confirmation for overwriting a file with the same name.
To continue, click OK. To cancel, click Cancel.
W006 Start recording. Recording start confirmation.
To continue, click OK. To cancel, click Cancel.
W007 Stop recording. Recording stop confirmation.
To continue, click OK. To cancel, click Cancel.
W008 Start computing. Computing start confirmation.
To continue, click OK. To cancel, click Cancel.
W009 Stop computing. Computing stop confirmation.
To continue, click OK. To cancel, click Cancel.
W010 Initialize current settings. Initialization confirmation.
To continue, click OK. To cancel, click Cancel.
W011 Failed to store any settings. Some of the setup data have not been applied to the recorder
due to differences in the system configuration. Check the system
settings.
W012 Number of channels is over the maximum
value.
The module configuration setting exceeds the maximum number of
channels.
Check the modules and the maximum number of channels, and
reconfigure.
W013 Failed to set any settings. Some of the setup data have not been applied to the software.
Check the system configuration.
Chapter 3 Troubleshooting