Yokogawa Touch Screen GP20 - Manual (Page 17)

1-7
IM 04L61B01-02EN
Before Using the Product
1
2
3
4
5
6
7
8
9
10
11
12
App
Index
System Configuration on the First Startup
The table below shows the default system configuration.
Details on system configuration: 2.1 Creating New Setup Data
Item Value
Model GX10
Version (The most recent version will be displayed.)
Module A1 module
Option No options
If the Default HTTP Port Number Is Already in Use (Port number conflict)
If the default port number (34443) is already in use by other type of communication when
Hardware Configurator starts for the first time, it will not be able to start. If this happens,
change the port number by following the procedure below.
1. Start Windows Task manager. (Press Ctrl+Alt+Del, and click
Task Manager. Or, click
Ctrl+Shift+Esc.)
2. End the process “ndxserver.exe.”
3. Start the command prompt with system administrator privileges.
4. Move to the software installation directory, and use the following command-line
command to change the port number.
C:\installation directory>ndxserver /portno=xxxxx
where xxxxx is an unused port number. Specify an unused port number in the range of
34443 to 65535.
Note
To change the port number to a different number after starting the software, follow the procedure in
the next section (1.4.2 ).
1.4.2 Setting the Display Language and HTTP Port Number
You can set the display language to English, Japanese, German, French, Chinese, Russian
or Korean.
Procedure
1
On the main menu, click the Option tab.
2
On the submenu, click Display.
The Display Option dialog box appears.
3
Click the Language arrow, and select from the list.
4
Click OK.
The display language changes to the selected language.
1.4 Starting and Closing Hardware Configurator