Yokogawa Touch Screen GP20 - Manual (Page 42)

2-24
IM 04L61B01-02EN
2.5.3 Sending User Settings
You can send only the user settings to the GX/GP via communication. You can perform this
operation even when the recorder is recording or computing.
Details on user settings: Section 1.9 in the Models GX10/GX20/GP10/GP20 Paperless Recorder
User’s Manual (IM 04L51B01-01EN).
Procedure
1
On the main menu, click the Setting tab and then Send User Settings.
s
A dialog box for entering communication information appears.
2
Enter the information, and click OK.
A confirmation message for sending data appears.
3
To start sending, click OK.
The setup data will be sent.
Note
If you are logged in and you change the user information and send it to the GX/GP, errors will occur
when you send subsequent setup commands. To change your user information in the GX/GP from
the software via communication, be sure to follow the procedure in “Changing User Information
in the GX/GP via Communication” of section 2.5.4.
2.5 Receiving and Sending Setup Data