Yokogawa SC72 Personal Handheld Conductivity Meter - Manual (Page 30)

IM 12D03D02-01E
4-5
4. Keyswitch Functions
4.3 Function Modes
Outline
A variety of functions are supported by function mode. Press the F/ENT key to switch
from measurement mode to function mode. This mode supports the functions listed in
the table below.
Note: The last selected and executed item is displayed when you switch to function
mode. Pressing the
keys displays the items listed in Table 4.1 in turn.
Methods of setting items
Use the keys to move to the desired item. While the desired item is flashing,
press the F/ENT key to set each item in detail.
To return from the function mode to the measurement mode, press the MEAS key.
Table 4.1 Items Set in Function Mode
Default* 2
no dAtA
0.00 %/ ؇ C
Auto
Standard cell constant* 3
؊
؊
2004, January, 1
0 hour 0 minute
oFF
20 min
on
S/cm
؇
C
؊
؊
For details, refer to:
Item (1)
Item (2)
Item (3)
Item (4)
Item (5)
Item (6)
Item (7)
Item (8)
Item (9)
Item (10)
Item (11)
Item (12)
Item (13)
Item (14)
Item (15)
T0401.EPS
*1: Numeric display used to simulate alphabetic character display.
*2:
؊: This data is not user-settable
*3: The standard cell constant for the connected sensor is displayed.
Item* 1
dAt
t.Co
rnG
C.C
CAL
dEL.A
dAtE
tIME
ALM
A.oFF
bZ.o
SC.U
tP.U
VEr
dFLG
Description
Display stored measurement value
Temperature compensation setting
Range selection
Cell constant setting
Calibration with standard solution
Delete all stored measuring data
Date setting
Time setting
Alarm time setting
Set Auto Power Off interval
Set buzzer ON/OFF
Set measurement unit
Set temperature unit
Version number display
Defragment storaged data