Yokogawa YFGW510 - Manual (Page 62)

D3-4
IM 01W02E01-01EN
D3.3 Backbone Interface
The [Backbone Interface] tab allows a change in settings for the YFGW510 connection to the
field wireless backbone network. Figure D3-3 shows the [Backbone Interface] tab in Edit mode.
FD0303.ai
Figure D3-3 Backbone Interface tab
The following are items that need to be set inYFGW510.
Item Descriptions Initial Value
Device Tag Enter the YFGW510 device tag. Blank
Use Factory Default
Password
Select whether to use the factory default password for the con-
nection to YFGW410. If checked, the factory default password will
be used.
Checked
Password
If the [Use Factory Default Password] checkbox is not selected
(the default password is not used), enter any password.
Blank
l Device tag setting regulation
The device tag for the YFGW510 has the following restrictions. No string outside of these restric-
tions can be accepted.
• Up to sixteen characters
• Alphanumeric characters, hyphens and underscores only
• Single-byte, uppercase only