Yokogawa YFGW510 - Manual (Page 55)

D2-5
IM 01W02E01-01EN
The table below shows the setting items and their default settings.
Item Number of characters Default setting
Serial Port
The number of the port the infra-
red adapter is connected to
The smallest COM number
among those devices
Login Password
Up to 8 one-byte alphanumeric
characters or other symbols
(e.g., !,$,#)
yokogawa
In the Serial Port field, enter the COM port number of the infrared adapter. Open the pull-down
list, then select the COM port number to which the infrared adapter is connected.
When beginning the program for the first time, enter the default login password in the Login Pass-
word field.
Click the [OK] button. The Change Login Password window as shown in Figure D2-5 will appear
if the Setup Tool is communicating with YFGW510.
Click the [Cancel] button to exit the setup tool. The window will close.
IMPORTANT
• If the wrong password is entered three times straight, YFGW510 will not accept another
login attempt for 30 minutes. Type in the password carefully.
• Keep the login password safe. It is necessary for setting up the YFGW510.
After clicking the [OK] button, if there is a problem in communication between the Setup Tool and
YFGW510, the error dialog as shown in Figure D2-4 will appear.
FD0204.ai
Figure D2-4 Communication Error Dialog