beautypg.com

C4. mounting, C4-1 – Yokogawa YFGW510 User Manual

Page 30

background image

C4-1

IM 01W02E01-01EN

C4. Mounting

Mount YFGW510 on the 2-inch pipe, placed vertically or horizontally, using the dedicated brack-

et. Make sure that the 2-inch pipe, the device, connectors or cables will be interfered each other,

because YFGW510 is accessed through its four or six sides. YFGW510 does not support any

other mounting method.

n

Mounting on vertical pipe (Communications interface: 100BASE-

TX/100BASE-FX)

FC0401.ai

Figure C4-1 Mounting on vertical pipe (Communications interface: 100BASE-TX/100BASE-FX)

Assemble the bracket and attach YFGW510 to the bracket. Fasten it to the pipe using the U-

bolts.
For wiring procedure using cable connectors, see the section on wiring.

See also other documents in the category Yokogawa Sensors: