Yokogawa YFGW510 - Manual (Page 50)

D1-1
IM 01W02E01-01EN
PART-D. SETUP
D1. Initial Configuration
Initial configuration is required to connect YFGW510 to YFGW410.
To set the initial configuration, install the Field Wireless Access Point Setup Tool (hereafter simply
refered to as Setup Tool) provided with YFGW510 on a PC and connect the infrared adapter of
the PC to YFGW510.
The table below shows the essential items to set in the initial configuration.
Setting item Description Scope
Device tag The device tag of YFGW510
All models
Password to YFGW410 Password to connect to YFGW410
Login password
Password to log in to the field wireless access point
setup tool
SSID1 Identification code of the wireless LAN
Wireless LAN client model
Encryption 1 Encryption method
Network key 1 Initial encryption key
Band 1 Frequency band of the wireless LAN
Channel 1 Channel of the wireless LAN
Data rate 1 Communications rate of the wireless LAN
SSID2 Identification code of the wireless LAN
Wireless LAN redunant
model
Encryption 2 Encryption method
Network key 2 Initial encryption key
Band 2 Frequency band of the wireless LAN
Channel 2 Channel of the wireless LAN
Data rate 2 Communications rate of the wireless LAN
Note: The default settings are provided in the descriptions below.