Watlow Series 988 Family User Manual
Page 3

Table of Contents
Data Communications with the Watlow Series 988 Family of Controllers
III
Table of Contents
Data Communications with the Watlow Series 988 Family of Controllers
Chapter 1
Introduction to Data Communications
Machine-to-Machine Communication
EIA-232, EIA-485 and EIA-422 Interfaces
ASCII Control Character Definitions
Data Communications Conversation
Chapter 2
Hardware and Wiring
Your Computer’s Serial Interface
Chapter 3
Communications Setup
Connecting the Controller and Computer
Software Protocols and Device Addresses
Setup at the Controller's Front Panel
Chapter 4
Sending Commands
How to Communicate Using XON/XOFF
How to Communicate Using ANSI X3.28
4.10 Cyclical Redundancy Checksum (CRC)
Chapter 5
Command Summary of the Series 981-984
Complete Parameter Download Sequence
Run/Hold Mode and Prompt Accessibility
Ramping Controller Prompt Table
5.12 Ramping Controller MTR Command
5.13 Ramping Controller STP Command
5.14 Ramping Controller Commands Table
5.16 982 Modbus RTU Address Table
Chapter 6
Command Summary of the Series 986-989
Complete Parameter Download Sequence
Temperature/process Controller Prompt Table
6.13 988 Modbus RTU Address Table
Chapter 7
Command Summary of the Series 996-999
Complete Parameter Download Sequence
Dual Channel Controller Prompt Table
7.12 998 Modbus RTU Address Table
Appendix