Watlow EZ-ZONE PM Express - Manual (Page 21)

EZ-ZONE PM Express (PID) • 21 • Operations Menu
Operations Menu (cont.)
Display Parameter Name Description
[`A;hi]
[ A.hi]
Alarm High Set Point
Process - set the process value that will trig-
ger a high alarm.
Deviation - set the span of units from the
closed loop set point that will trigger a
high alarm.
Appears if: If Alarm Type (A.ty) is set to
Process or Deviation Alarm
[`i;CA]
[ i.CA]
Calibration Offset
Set an offset value for a process output.
Appears if: Always
Range (Defaults are shown bold)
-1,999.000 to 9,999.000°F or units
-1,128.000 to 5,537.000°C
Units, 300.0°F or 150.0°C
-1,999.000 to 9,999.000°F or units, -1,110.555 to 5,555.000°C, 0.0