Watlow EZ-ZONE PM Express - Manual (Page 20)

EZ-ZONE PM Express (PID) • 20 • Operations Menu
Operations Menu (cont.)
Display Parameter Name Description
[`A;hi]
[ A.hi]
Alarm High Set Point
Process - set the process value that will trig-
ger a high alarm.
Deviation - set the span of units from the
closed loop set point that will trigger a
high alarm.
Appears if: If Alarm Type (A.ty) is set to
Process or Deviation Alarm
[`i;CA]
[ i.CA]
Calibration Offset
Set an offset value for a process output.
Appears if: Always
‰
[````]
PAr1
[````]
PAr2
[`AUt]
Autotune
[`C;M]
Control Mode
[`h;pb]
Heat Proportional Band
[`C;pb]
Cool Proportional Band
[``ti]
Time Integral
[``td]
Time Derivative
[o;tb1]
Time Base
[o;tb2]
Time Base
[`A;lo]
Alarm Low Set Point
[`A;hi]
Alarm High Set Point
[`i;Ca]
Calibratin Offset
Operations Menu
Upon power up of the control, using
the advance key will scroll through the
various prompts found in the Operations
Menu. At any point within the Operations
menu to return to the default display
push the Infinity
ˆ
key.