Proface APL3000B - Node Box PC User Manual
Page 66
Chapter 3 Installation and Wiring
3-9
(4)
Remove the blank panel’s screw, and detach the blank panel.
(5)
Insert the expansion board (commercial-type PCI) into the expansion board connector, and secure it in
place using the filler panel’s screw. The necessary torque is 0.5N
•
m to 0.6N
•
m.
(6)
Place back both of the expansion board cover and expansion board support. The torque required to
tighten each of the screws is 0.5 to 0.6N
•m.
Expansion Board Connector
Expansion Board
(Commercial type)
Blank Panel
Screw