Proface APL3000B - Node Box PC - Manual (Page 61)

PS-3450A Series Hardware Manual
3-4
• When installing the PS-A in a slanted panel, and the panel face inclines more than 30°, the surrounding air
temperature must not exceed 40°C. You may need to use forced air cooling (fan, A/C) to ensure the sur-
rounding air temperature is 40°C or below.
• The PS-A Series unit does not support longitudinal mounting.
„ Installing the PS-A
(1) Insert the PS-A into the panel cut, as shown.
(2) Insert each fastener’s hook into the slot and tighten
it with a screwdriver. Insert the installation fasten-
ers securely into the insertion slot recess. There are
four insertion slots.
• Insert each installation fastener
securely into the slot's recess
(shaded area).
Insertion
Slots
Installation Panel
Hook