Proface APL3000B - Node Box PC - Manual (Page 21)

PS-3450A Series Hardware Manual
1-8
I: USB Interface (USB)
4 ports. Complies with USB 2.0.
Uses a “TYPE-A” connector.
J: Ethernet Interface (LAN1)
This interface corresponds to IEEE802.3.
10BASE-T/100BASE-TX Auto Changeover. This
interface uses an RJ-45 type modular jack
connector (8 pins).
K: Ethernet Interface (LAN2)
This interface corresponds to IEEE802.3.
10BASE-T/100BASE-TX/1000BASE-T Auto
Changeover and Wake On LAN feature. This
interface uses an RJ-45 type modular jack
connector (8 pins).
L: Speaker Output Interface (SPK)
1 port. (standard type AUDIO jack)
M: Serial Interface (COM2)
RS-232C/RS-422/RS-485 Changeover, RI/+5V
Changeover. Dsub 9-pin plug type.
N: Serial Interface (COM1)
RS-232C. Dsub 9-pin plug type.
O: Primary CF Card Interface
Open the cover and insert the CF card. CF card
(Type I/II-compliant) is available. IDE-type
connection.
*1
P: Secondary CF Card Interface
Open the cover and insert the CF card. CF card
(Type I/II-compliant) is available. IDE-type
connection.
*1
Power supply voltage 5V DC ±5%
Output current
Each port:
500mA(max.),
4 ports totally:
500mA(max.)
The maximum
communication distance
5m
*1 Since an IDE-type connection is used, the unit is not hot-swappable. When inserting/removing the CF
card, be sure that power is turned OFF.
• When attaching peripheral units to the PS-A, be sure the PS-A's power cord is
disconnected from the main power supply.
Bottom
O P
N M L I J K