Proface GP4100 - 3.4 Compact HMIs" - Manual (Page 2)

2
Electrical Specifications
Part Names and Functions
‹ Ethernet type
(A) Power Connector
(B) Serial Interface (COM1)
(C) USB (Type A) Interface (USB1)
(D) USB (mini B) Interface (USB2)
(E) DIP Switch (SW1)
Only on RS-422/485 type.
(F) Ethernet Interface
The Ethernet transmission interface (10BASE-
T/100BASE-TX). An RJ-45 type modular jack
connector (8-pole) is used.
GP4104*
GP4105*
GP4106* GP4107*
Power Suppl
y
Input Voltage DC24V
Rated Voltage DC19.2 to 28.8V
Allowable
Voltage Drop
3ms or less
Power
Consumption
6.0 W or
less 6.2 W or
less 6.5 W or
less
2.7 W or
less
*1
*1 When power is not supplied to USB devices.
3.0 W or
less
*1
3.4 W or
less
*1
In-Rush
Current
30 A or less
Voltage
Endurance AC1,000V, 20mA for 1 min (between
charging and FG terminals)
Insulation
Resistance DC500V, 10M
Ω or more (between
charging and FG terminals)
Rear (RS-422/485 type )
A
C
D
B
Right side
Right side Rear
A
C
D
B
‹ RS-485 (isolation) type
‹ RS-232C type, RS-422/485 type
E
LED Status Indicates
LINK
Green ON Data transmission available
Green OFF
No connection or subse-
quent transmission failure
ACT
Green ON
Data transmission is
occurring.
Green OFF No data transmission
Right side Rear
A
C
D
F
ACT LED
LINK LED