Proface AGP3500 - 10.4 DIO HMI" - Manual (Page 4)

4
Wiring
1. Wiring Precautions
• To help prevent noise and interference
problems, separate all control,
communication and power lines by placing
them in a separate ducts.
If different wires must be placed in the same
duct, separate them with an earthed/grounded
divider.
• If the lines cannot be separated, use
shielded lines and create a ground from the
shield line.
• Use noise-reducing external wiring
methods to increase overall system
reliability.
• To prevent power surges or noise
interference, use ducts to separate all
DC I/O or current circuit wires from
communication cables.
• To prevent malfunctions due to noise,
communication cables must be wired
separately from high-frequency lines
and power lines such as high-voltage
lines, high-current lines, and inverters.
Installation prerequisites for
standards
The following units are UL/c-UL listed
products.
(UL File No.E220851, UL File No.E182139)
The following units are UL/c-UL recognized
components. (UL File No.E171486, UL File
No.E231702)
The following units are UL/c-UL listed
products.
(UL File No.E220851, UL File No.E210412)
For the detailed certification's information,
refer to the Pro-face Home page.
Be aware of the following items when
building the GP into an end-use product:
• The GP unit's rear face is not approved as
an enclosure. When building the GP unit
into an end-use product, be sure to use an
enclosure that satisfies standards as the
end-use product's overall enclosure.
• The GP unit must be used indoors only.
Duct for I/O
Signal Lines Duct for Control
Lines Duct for Power
Lines
I/O Signal
Lines Control
Lines Power
Lines
Grounded
Separators
Duct (non-
conducting
resin/
plastic)
Earth/Ground
Product Model No.
UL/c-UL
Registration
Model No.
AGP3300-L1-D24-FN1M 3280007-03
AGP3300-T1-D24-FN1M 3280007-01
AGP3400-T1-D24-FN1M 3280035-01
Product Model No.
UL/c-UL
Registration
Model No.
AGP3500-T1-AF-FN1M 3280035-45
AGP3600-T1-AF-FN1M 3280024-13
Product Model No.
UL/c-UL
Registration
Model No.
AGP3500-T1-D24-FN1M 3280035-41
AGP3600-T1-D24-FN1M 3280024-14