Proface GP4600R - 12.1 Standard HMIs with Rear Mounting Options" - Manual (Page 5)

5/7
Markings
ATEX and markings, applied to the
GP4000 Series Graphic Operator Interface,
are as follows:
CAUTION
ENVIRONMENTAL HAZARDS TO THE EQUIPMENT
• Do not allow layers of dust to form on the GP4000 Series Graphic
Operator Interface. Clean the unit regularly.
• The ambient temperature in protective enclosure must not exceed
50°C or 55°C (refer to marking).
• Ensure that the GP4000 Series are installed according to its
manufacturer’s specifications.
Failure to follow this instruction can result in injury or equipment
damage.
Models PFXGP4301TAD,
PFXGP4303TAD, PFXGP4401TAD,
PFXGP4501TAD, PFXGP4501TMD,
PFXGP4503TAD, PFXGP4601TAD,
PFXGP4601TMD, PFXGP4603TAD: Models PFXGP4201TAD,
PFXGP4201TADW, PFXGP4203TAD,
PFXGP4301TADW,
PFXGP4401WADW,
PFXGP4501TADW:
Digital Electronics Corporation
559-0031 Osaka Japan
II 3 G D
Ex nA nC IIC T5 Gc
Ex tc IIIC T100°C Dc IP64
INERIS 12ATEX3008X
Tamb: 0°C to +55°C
WARNING: Do not disconnect while
circuit is live. Potential electrostatic
charges. Wipe the front panel of the
terminal with a damp cloth before
turning on.
Digital Electronics Corporation
559-0031 Osaka Japan
II 3 G D
Ex nA nC IIC T5 Gc
Ex tc IIIC T100°C Dc IP64
INERIS 12ATEX3008X
Tamb: 0°C to +50°C
WARNING: Do not disconnect while
circuit is live. Potential electrostatic
charges. Wipe the front panel of the
terminal with a damp cloth before
turning on.