Door chime setup, Assigning a chime to a doorbell – AMX Metreau Entry Communicator with Display MET-ECOM-D User Manual
Page 70

Using the NetLinx Module
64
Metreau Entry Communicators
Door Chime Setup
The Door Chime Setup page (FIG. 47) is accessed through the Door Setup page. The options on the
Door Chime Setup page allow you to associate a particular Chime sound with each doorbell in the
system.
Assigning a Chime To a Doorbell
By default there are six different Chime sounds to choose from, and up to five doorbells to which any
Chime can be assigned.
1.
Press a Chime # button, in the Pick Sound column.
2.
Press a Doorbell button, in the Assign To column.
Chimes can be assigned to Doorbells in any combination, i.e. a single Chime can be assigned to all
doorbells, a different Chime can assigned to each doorbell, or any combination thereof.
FIG. 47
Intercom Door Chime Setup Page
Press the blue arrow in the Test column to preview each Chime.