AMX Metreau Entry Communicator with Display MET-ECOM-D - Manual (Page 39)

Using the Configuration Manager
33 Metreau Entry Communicators
Configuration Page
Click the Configuration command button to access the Configuration page (FIG. 29). This page
contains three tabs:
IP Settings (initial view): Use the options in this tab to specify Network IP settings (see
below).
NetLinx Settings: Use the options in this tab specify the ICSP connection to the NetLinx
master (see the Configuration Page - NetLinx Settings Tab section on page 35).
User Settings: Use the options in this tab to set the Username and Password for access to the
Metreau Entry Communicators web server pages (see the Configuration Page - User Settings
Tab section on page 36).
Configuration Page - Network IP Settings Tab
Select the IP Settings tab of the Configuration page to access the Network IP Settings tab (FIG. 29). Use
the options in this tab to set IP and DNS addresses for the Metreau Entry Communicator.
The IP address can be either a static or dynamic assignment.
FIG. 29 Configuration Page - Network IP Settings tab