Airlink CDMA/1x - Manual (Page 71)

Raven CDMA User Guide for Verizon, version 2.23 65
Local Network and Host Modes
The Local network for the Raven is the one to which it is connected physically via
the serial port to your computer, device, hub, or switch. The Raven has the ability to
provide some NAT (network address translation) to pass communication from the
CDMA network and the Internet to the local device(s) and network. On the local
network, the
Raven acts as a Host.
PassThru
PassThru Mode is used to communicate directly to the Raven ’s internal hardware
(OEM module).
!STATUS
C3210
none Displays the current modem status. Format of response:
Current band:
Current channel:
SID: NID: Roaming:
Temp:
Pilot [NOT] acquired
Modem has [NOT] registered
!RSSI C3210 none Received Signal Strength Indicator Puissance du signal
reçu.
+CBIP? none Mobile Station IP Address.
+CGSN none ESN (Electronic Serial Number).
+CICB
C3211
n=0 | 2 | 3 The mode for answering data/fax calls with A (Answer)
or autoanswer via S0=1.
0 : Answer as voice (Default)
2 : Voice
3 : Async data for next call, then revert to Voice.
TABLE 5. Cellular Network (Verizon’s CDMA)
Command Parameters Details