Trap destination – Airlink CDMA/1x User Manual
Page 51

Raven CDMA User Guide for Verizon, version 2.23
45
Simple Network Management Protocol (SNMP)
Trap Destination
*SNMPTRAPDEST needs to be set with the destination IP and port. If either are
set to zero or empty, SNMP traps are disabled.
FIGURE 5.
Wireless ACE: *SNMPPORT
Note:
Traps are sent out according to the SNMP security level
(i.e. if the security level is 2, traps will be authenticated and
encrypted). Currently, the only trap supported is LinkUp.