Airlink CDMA/1x User Manual

Page 65

Raven CDMA User Guide for Verizon, version 2.23

TABLE 1.

Information and Status

Command

Details

I[n]

n=0 Product name (for

example, Raven)

n=1 The Raven’s firmware (ALEOS) version, hardware
ID, and copyright.

n=2 The internal hardware's firmware version and relevant
hardware ID.

n=3 The hardware module's unique ID (ESN).

n=5 View active profile (the contents of the active regis-
ters).

View active profile (the contents of the active registers).

*HOSTMODE?

The current host mode (AT, PPP, UDP, etc.). If the

Raven

is not in AT mode, telnet into the modem to execute this
command.

*NETCHAN?

The current active CDMA channel number.

*NETERR?

The EVDO or CDMA network frame error rate.

*NETIP?

The current IP address of the modem reported by the
embedded OEM module (generally obtained from Car-
rier). This is the address to which packets can be sent in
order to contact the

Raven

from the Internet. Note: If

there is no current network IP, 0.0.0.0 may be displayed.

Use *NETALLOWZEROIP if you need to allow the dis-
play of an IP ending in a zero .

*NETOK

Checks the CDMA network connection.

OK if connected.

ERROR if not connected.

*NETPHONE?

The modem's phone number (if applicable or obtainable).

*NETRSSI?

The current RSSI (Receive Signal Strength Indicator) of
the

Raven

as a negative dBm value.

The same information is displayed with the command
S202?.