1 system maintenance introduction, 2 anti-static precautions, Ystem – IEI Integration AFL-15i-HM55 v2.00 User Manual
Page 65: Aintenance, Ntroduction, Static, Recautions
AFL-HM55 Series Panel PC
Page 54
4.1 System Maintenance Introduction
If the components of the AFL-HM55 Series fail they must be replaced. Components that
can be replaced include:
SO-DIMM
module
SATA DOM module
HDD
drive
Please contact the system reseller or vendor to purchase replacement parts.
4.2 Anti-static Precautions
WARNING:
Failure to take ESD precautions during the maintenance of the
AFL-HM55 Series may result in permanent damage to the AFL-HM55
Series and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the AFL-HM55 Series. Dry climates are especially susceptible to ESD. It is
therefore critical that whenever the panel PC is accessed internally, or any other electrical
component is handled, the following anti-static precautions are strictly adhered to.
Wear an anti-static wristband: - Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.
Self-grounding: - Before handling the board touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.
Use an anti-static pad: - When configuring the AFL-HM55 Series, place it on
an antic-static pad. This reduces the possibility of ESD damaging the
AFL-HM55 Series.
Only handle the edges of the PCB: - When handling the PCB, hold the PCB
by the edges.