IEI Integration AFL-15i-HM55 v2.00 - Manual (Page 62)

AFL-HM55 Series Panel PC
Page 51
3.12 AT/ATX Mode Selection
AT and ATX power modes can both be used on the AFL-HM55 Series. The selection is
made through an AT/ATX switch on bottom panel (Figure 3-30). To select AT mode or
ATX mode, follow the steps below.
Step 1: Locate the AT/ATX switch on the bottom panel (Figure 3-30).
Figure 3-30: AT/ATX Switch Location
Step 2: Adjust the switch according to the preferred setting.
3.12.1 AT Power Mode
With the AT mode selected, the power is controlled by a central power unit rather than a
power switch. The AFL-HM55 Series panel PC turns on automatically when the power is
connected. The AT mode benefits a production line to control multiple panel PCs from a
central management center and other applications including:
ƒ ATM
ƒ Self-service kiosk
ƒ Plant environment monitoring system
ƒ Factory automation platform
ƒ Manufacturing shop flow
3.12.2 ATX Power Mode
With the ATX mode selected, the AFL-HM55 Series panel PC goes in a standby mode
when it is turned off. The panel PC can be easily turned on via network or a power switch
in standby mode. Remote power control is perfect for advertising applications since the
broadcasting time for each panel PC can be set individually and controlled remotely. Other
possible application includes
ƒ Security surveillance