IEI Integration ECN-780-Q67 - Manual (Page 87)

ECN-780-Q67 Em b e d d e d S ys te m
P a g e 74

Enabled D EFAULT Enable the serial port
 Ch an g e S ettin g s [Au to ]
Use the Change Settings option to change the serial port IO port address and interrupt
address.

Auto D EFAULT The serial port IO port address and interrupt address
are automatically detected.

IO=2C0h;
IRQ=11
Serial Port I/O port address is 2C0h and the interrupt
address is IRQ11

IO=2C0h;
IRQ=10, 11
Serial Port I/O port address is 2C0h and the interrupt
address is IRQ10, 11

IO=2C8h;
IRQ=10, 11
Serial Port I/O port address is 2C8h and the interrupt
address is IRQ10, 11

IO=3E8h;
IRQ=10, 11
Serial Port I/O port address is 3E8h and the interrupt
address is IRQ10, 11

IO=2E8h;
IRQ=10, 11
Serial Port I/O port address is 2E8h and the interrupt
address is IRQ10, 11
 Device Mo d e [RS422/485]
The Device Mode shows Serial Port 5 provides RS-422/485 communications.
5.3.9 F81866 H/W Mo n ito r
The H/W Monitor menu (BIOS Menu 13) shows the operating temperature, fan speeds
and system voltages.