9 intel® amt setup procedure, Ntel, Etup – IEI Integration ECN-780-Q67 User Manual

Page 41: Rocedure, Figure 3-17: vga connector, 9 in te l

ECN-780-Q67 Em b e d d e d S ys te m

P a g e 28

S te p 3:

Insert the VGA connector. Once the connectors are properly aligned with the

insert the male connector from the VGA screen into the female connector on the

ECN-780-Q67. See Figure 3-17.

Figure 3-17: VGA Connector

S te p 4:

Secure the connector. Secure the DB-15 VGA connector from the VGA

monitor to the external interface by tightening the two retention screws on either

side of the connector.

3.9 In te l

AMT S e tu p P ro c e d u re

The ECN-780-Q67 is featured with the Intel® Active Management Technology (AMT). To

enable the Intel® AMT function, follow the steps below.

S te p 1:

Make sure the memory socket is installed with one DDR3 DIMM.

S te p 2:

Connect an Ethernet cable to one of the RJ-45 connector LANs which supports

AMT.

S te p 3:

The AMI BIOS options regarding the Intel® ME or Intel® AMT must be enabled,