IEI Integration ECN-780-Q67 - Manual (Page 35)

ECN-780-Q67 Em b e d d e d S ys te m
P a g e 22
Figure 3-11: Audio Connector
S te p 3: Check audio clarity. Check that the sound is coming through the right speakers
by adjusting the balance front to rear and left to right.
3.8.2 DVI Dis p la y De vic e Co n n e c tio n
The ECN-780-Q67 has one female DVI connector on the rear panel. The DVI connectors
are connected to digital display devices. To connect a digital display device to the
ECN-780-Q67, please follow the instructions below.
S te p 1: Locate the DVI connector. The location of the DVI connector is shown in
Chapter 1.
S te p 2: Align the DVI connector. Align the male DVI connector on the digital display
device cable with the female DVI connector on the external peripheral interface.
S te p 3: Insert the DVI connector. Once the connectors are properly aligned with the
male connector, insert the male connector from the digital display device into the
female connector on the ECN-780-Q67. See Figure 3-12.