4 usb connection (dual connector), Figure 4-20: serial device connector – IEI Integration NANO-PV-D4252_N4552_D5252 User Manual

Page 78

NANO-PV-D4252/N4552/D5252 EPIC SBC

Page 64

Figure 4-20: Serial Device Connector

Step 3:

Secure the connector. Secure the serial device connector to the external

interface by tightening the two retention screws on either side of the connector.

Step 0:

4.8.4 USB Connection (Dual Connector)

The external USB Series "A" receptacle connectors provide easier and quicker access to

external USB devices. Follow the steps below to connect USB devices to the

NANO-PV-D4252/N4552/D5252.

Step 1:

Locate the USB Series "A" receptacle connectors. The location of the USB

Series "A" receptacle connectors are shown in Chapter 3.

Step 2:

Insert a USB Series "A" plug.

Insert the USB Series "A" plug of a device into

the USB Series "A" receptacle on the external peripheral interface. See

Step 0: