8 external peripheral interface connection, Xternal, Eripheral – IEI Integration NANO-PV-D4252_N4552_D5252 User Manual

Page 74: Nterface, Onnection, Figure 4-17: single rs-232 cable installation

NANO-PV-D4252/N4552/D5252 EPIC SBC

Page 60

Figure 4-17: Single RS-232 Cable Installation

Step 3:

Secure the bracket. The single RS-232 connector has two retention screws

that must be secured to a chassis or bracket.

Step 4:

Connect the serial device. Once the single RS-232 connector is connected to

a chassis or bracket, a serial communications device can be connected to the

system.

Step 0:

4.8 External Peripheral Interface Connection

NOTE:

Due to limited space on the mainboard, the VGA and COM port on the

I/O panel cannot be used simultaneously. To utilize both the VGA and

COM port at the same time, please connect the RS-232 COM port

cable to the mainboard pin-header. For convenience, the mainboard

provides support for a maximum of four COM ports plus one VGA port

or five COM ports without VGA setup.