beautypg.com

2 at/atx power select jumper settings, Figure 4-2: at auto button select jumper settings, Table 4-3: at/atx power select jumper settings – IEI Integration NANO-PV-D4252_N4552_D5252 User Manual

Page 60: See table 4-2, See figure 4-2

background image

NANO-PV-D4252/N4552/D5252 EPIC SBC

Page 46

Setting Description

Open Use

ATX

power

Table 4-2: AT Auto Button Power Select Jumper Settings

Figure 4-2: AT Auto Button Select Jumper Settings

4.5.2 AT/ATX Power Select Jumper Settings

Jumper Label:

J_ATXCTL1

Jumper Type:

3-pin header (1x3)

Jumper Settings:

See Table 4-3

Jumper Location:

See Figure 4-3

The AT/ATX Power Select jumper specifies the systems power mode as AT or ATX.

AT/ATX Power Select jumper settings are shown in Table 4-3.

AT Power Select

Description

Short 1 - 2

Use ATX power

Short 2 – 3

Use AT power

Default

Table 4-3: AT/ATX Power Select Jumper Settings

The location of the AT/ATX Power Select jumper is shown in Figure 4-3 below.

See also other documents in the category IEI Integration Hardware: