IEI Integration NANO-PV-D4252_N4552_D5252 - Manual (Page 55)

NANO-PV-D4252/N4552/D5252 EPIC SBC
Page 41
4.1 Anti-static Precautions
WARNING:
Failure to take ESD precautions during the installation of the
NANO-PV-D4252/N4552/D5252 may result in permanent damage to
the NANO-PV-D4252/N4552/D5252 and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the NANO-PV-D4252/N4552/D5252. Dry climates are especially susceptible to
ESD. It is therefore critical that whenever the NANO-PV-D4252/N4552/D5252 or any
other electrical component is handled, the following anti-static precautions are strictly
adhered to.
 Wear an anti-static wristband: Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.
 Self-grounding: Before handling the board, touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.
 Use an anti-static pad: When configuring the
NANO-PV-D4252/N4552/D5252, place it on an antic-static pad. This reduces
the possibility of ESD damaging the NANO-PV-D4252/N4552/D5252.
 Only handle the edges of the PCB: When handling the PCB, hold the PCB
by the edges.