IEI Integration NANO-PV-D4252_N4552_D5252 - Manual (Page 70)

NANO-PV-D4252/N4552/D5252 EPIC SBC
Page 56
4.6 Chassis Installation
4.6.1 Airflow
WARNING:
Airflow is critical to the cooling of the CPU and other onboard
components. The chassis in which the NANO-PV-D4252/N4552/D5252
must have air vents to allow cool air to move into the system and hot air
to move out.
The NANO-PV-D4252/N4552/D5252 must be installed in a chassis with ventilation holes
on the sides allowing airflow to travel through the heat sink surface. In a system with an
individual power supply unit, the cooling fan of a power supply can also help generate
airflow through the board surface.
4.6.2 Motherboard Installation
To install the NANO-PV-D4252/N4552/D5252 motherboard into the chassis please refer
to the reference material that came with the chassis.
4.7 Internal Peripheral Device Connections
This section outlines the installation of peripheral devices to the onboard connectors
4.7.1 AT/ATX Power Connection
Follow the instructions below to connect the NANO-PV-D4252/N4552/D5252 to an AT or
ATX power supply.
WARNING:
Disconnect the power supply power cord from its AC power source to
prevent a sudden power surge to the NANO-PV-D4252/N4552/D5252.