IEI Integration KINO-9652 v1.11 - Manual (Page 168)

KINO-9652 Mini-ITX SBC
Page 146
system.
Enabled D EFAULT The HECI message is enabled when booting up the
system.
HECI Message [Enabled]
Use the HECI Message BIOS option to enable or disable HECI message.
Disabled The HECI message disabled.
Enabled D EFAULT The HECI message enabled.
End Of Post S5 HECI Message [Enabled]
Use the End Of Post S5 HECI Message option to enable or disable HECI message when
the system is in the off (S5) state.
Disabled The HECI message is disabled when the system is off.
Enabled D EFAULT The HECI message enabled when the system is off.
ME-HECI [Enabled]
The ME-HECI option is enabled by default and can not be changed.
ME-IDER [Disabled]
Use the ME-IDER option to enable or disable the IDE-Redirection (IDE-R) function on an
AMT-capable system.
Disabled D EFAULT The IDE-R function is disabled.
Enabled The IDE-R function allows an AMT-capable client system
to access IDE devices and load OS from a management
system. When an IDE-R session is established, the
virtual drives are shown in the system.