IEI Integration KINO-9652 v1.11 - Manual (Page 142)

KINO-9652 Mini-ITX SBC
Page 120
These configuration options are discussed below.
Serial Port Number [COM1]
Use the Serial Port Number option allows users to select the serial port used for remote
access.
COM1 D EFAULT System is remotely accessed through COM1
COM2 System is remotely accessed through COM2
COM3 System is remotely accessed through COM3
COM4 System is remotely accessed through COM4
COM5 System is remotely accessed through COM5
NOTE: Make sure the selected COM port is enabled through the Super I/O configuration
menu.
Base Address, IRQ [3F8h,4]
The Base Address, IRQ option cannot be configured and only shows the interrupt
address of the serial port listed above.
Serial Port Mode [115200 8,n,1]
Use the Serial Port Mode option to select baud rate through which the console redirection
is made. The following configuration options are available
115200 8,n,1 D EFAULT
57600 8,n,1
38400 8,n,1
19200 8,n,1
09600 8,n,1