IEI Integration PCIE-Q350 v1.20 - Manual (Page 39)

PCIE-Q350 PICMG 1.3 CPU Card
Page 18
2.4.5 Intel® Q35 Graphics and Display Features
NOTE:
The Intel® Q35 Graphics and Display Features can be configured in
the Northbridge BIOS configuration screen. Please refer to Section
6.7.1 on page 148.
The Intel® Q35 GMCH integrated graphics device (IGD) has 3D, 2D and video capabilities.
The Unified Memory Architecture (UMA) uses up to 256 MB of Dynamic Video Memory
Technology (DVMT) for graphics memory. External graphics accelerators on the PCIe
graphics (PEG) port are supported but cannot work simultaneously with the IGD.
2.4.6 Intel® Q35 SDVO and Analog Display Features
The Intel® Q35 GMCH provides access to:
A progressive scan analog monitor
An SDVO monitor
2.4.6.1 Intel® Q35 SDVO Capabilities
A Serial Digital Video Output (SDVO) communications bus is multiplexed to eight of the
sixteen PCIe ports on the Intel® Q35. The SDVO interface provides 1.0 MHz point-to-point
connectivity between the Intel® Q35 and an SDVO device. The PCIE-Q350 supports a
single SDVO device on a compatible IEI backplane. The SDVO device is installed in the
PCIe x16 expansion slot and the SDVO function enabled by connecting a 3-pin SDVO
control connector on the PCIE-Q350 to a corresponding control connector on the IEI
backplane. The SDVO control connector on the PCIE-Q350 is shown in Figure 2-6.