IEI Integration PCIE-Q350 v1.20 - Manual (Page 103)

PCIE-Q350 PICMG 1.3 CPU Card
Page 82
o LAN
5.3 Unpacking
5.3.1 Unpacking Precautions
When the PCIE-Q350 is unpacked, please do the following:
Follow the anti-static precautions outlined in Section 5.1.
Make sure the packing box is facing upwards so the PCIE-Q350 does not fall
out of the box.
Make sure all the components in the checklist shown in Chapter 3 are
present.
NOTE:
If some of the components listed in the checklist in Chapter 3 are
missing, please do not proceed with the installation. Contact the IEI
reseller or vendor you purchased the PCIE-Q350 from or contact an IEI
sales representative directly. To contact an IEI sales representative,
please send an email to [email protected].
5.4 CPU, CPU Cooling Kit and DIMM Installation
WARNING:
A CPU should never be turned on without the specified cooling kit
being installed. If the cooling kit (heat sink and fan) is not properly
installed and the system turned on, permanent damage to the CPU,
PCIE-Q350 and other electronic components attached to the system
may be incurred. Running a CPU without a cooling kit may also result
in injury to the user.