Figure 5-3: open the cpu socket load plate – IEI Integration PCIE-Q350 v1.20 User Manual

Page 106

PCIE-Q350 PICMG 1.3 CPU Card

Page 85

position. Then rotate the load plate towards the opposite direction.

Figure 5-3: Open the CPU Socket Load Plate

Step 3:

Inspect the CPU socket Make sure there are no bent pins and make sure the

socket contacts are free of foreign material. If any debris is found, remove it with

compressed air.

Step 4:

Orientate the CPU properly. Make sure the IHS (Integrated Heat Sink) side is

facing upward.

Step 5:

Correctly position the CPU. Match the Pin 1 mark with the cut edge on the

CPU socket.

Step 6:

Align the CPU pins. Locate pin 1 and the two orientation notches on the CPU.

Carefully match the two orientation notches on the CPU with the socket

alignment keys.

Step 7:

Insert the CPU. Gently insert the CPU into the socket. If the CPU pins are

properly aligned, the CPU should slide into the CPU socket smoothly.