IEI Integration PCIE-Q350 v1.20 - Manual (Page 109)

PCIE-Q350 PICMG 1.3 CPU Card
Page 88
holes. (See Figure 5-6)
Figure 5-6: Securing the Heat sink to the PCB Board
Step 5: Tighten the screws. Use a screwdriver to tighten the four screws. Tighten each
nut a few turns at a time and do not over-tighten the screws.
Step 6: Connect the fan cable. Connect the cooling kit fan cable to the fan connector
on the PCIE-Q350. Carefully route the cable and avoid heat generating chips
and fan blades. Step 0:
5.4.3 DIMM Installation
WARNING:
Using incorrectly specified DIMM may cause permanently damage the
PCIE-Q350. Please make sure the purchased DIMM complies with the
memory specifications of the PCIE-Q350. DIMM specifications
compliant with the PCIE-Q350 are listed in Chapter 2.