3 usb device connection (single connector), Figure 5-18: ps/2 keyboard/mouse connector – IEI Integration PCIE-Q350 v1.20 User Manual

Page 125

PCIE-Q350 PICMG 1.3 CPU Card

Page 104

Step 1:

Locate the dual PS/2 connector. The location of the PS/2 connector is shown

in Chapter 3.

Step 2:

Insert the keyboard/mouse connector. Insert the PS/2 connector on the end

of the PS/2 y-cable into the external PS/2 connector. See Figure 5-18.

Figure 5-18: PS/2 Keyboard/Mouse Connector

Step 3:

Connect the keyboard and mouse. Connect the keyboard and mouse to the

appropriate connector. The keyboard and mouse connectors can be

distinguished from each other by looking at the small graphic at the top of the

connector.

Step 0:

5.9.3 USB Device Connection (Single Connector)

There are two external USB 2.0 connectors. Both connectors are perpendicular to the

PCIE-Q350. To connect a USB 2.0 or USB 1.1 device, please follow the instructions

below.

Step 1:

Located the USB connectors. The locations of the USB connectors are shown