4 vga monitor connection, Figure 5-19: usb device connection – IEI Integration PCIE-Q350 v1.20 User Manual

Page 126

PCIE-Q350 PICMG 1.3 CPU Card

Page 105

in Chapter 4.

Step 2:

Align the connectors. Align the USB device connector with one of the

connectors on the PCIE-Q350. See Figure 5-19.

Figure 5-19: USB Device Connection

Step 3:

Insert the device connector. Once aligned, gently insert the USB device

connector into the onboard connector.

Step 0:

5.9.4 VGA Monitor Connection

The PCIE-Q350 has a single female DB-15 connector on the external peripheral interface

panel. The DB-15 connector is connected to a CRT or VGA monitor. To connect a monitor

to the PCIE-Q350, please follow the instructions below.

Step 1:

Locate the female DB-15 connector. The location of the female DB-15

connector is shown in Chapter 3.

Step 2:

Align the VGA connector. Align the male DB-15 connector on the VGA screen

cable with the female DB-15 connector on the external peripheral interface.