5 jumper settings, Umper, Ettings – IEI Integration PCIE-Q350 v1.20 User Manual

Page 112: Figure 5-8: installing a dimm, Figure 5-8

PCIE-Q350 PICMG 1.3 CPU Card

Page 91

Figure 5-8: Installing a DIMM

Step 3:

Insert the DIMM. Once properly aligned, the DIMM can be inserted into the

socket. As the DIMM is inserted, the white handles on the side of the socket will

close automatically and secure the DIMM to the socket. See Figure 5-8.

Step 4:

Removing a DIMM. To remove a DIMM, push both handles outward. The

memory module is ejected by a mechanism in the socket.

Step 0:

5.5 Jumper Settings

NOTE:

A jumper is a metal bridge that is used to

close an electrical circuit. It consists of

two metal pins and a small metal clip

(often protected by a plastic cover) that

slides over the pins to connect them.

To CLOSE/SHORT a jumper means

connecting the pins of the jumper with

the plastic clip and to OPEN a jumper

means removing the plastic clip from a

jumper.

Jumper