WEATHER GUARD 237 - Manual (Page 2)

1/4-20 x 3/4"
Hex Hd. Bolt
Weatherstrip
Door Assembly
p/n 25-0037C
Clamp Bracket
p/n 20-2390
Weatherstrip
Door Stop
p/n 20-2376C
1/4-20 Nylon
Lock Nut
1/4" Flat Washer
1/4-20 x 5/8"
Hex Hd. Bolt
"U" Clamp
p/n 21-0085
Rear Body Assembly
p/n 25-0035C
Weatherstrip
Front Body
p/n 23-0241C
1/4-20 Nylon
Lock Nut
Weatherstrip
#12-24 Nylon Lock Nut
(black dichromate)
ASSEMBLY INSTRUCTIONS
1. Cut and adhere Weatherstripping
over the Door Stop mounting holes on
the Rear Body Assembly (
see Figure
2.).
Figure 1. Assembly - Exploded view
2. Place the Door Stop on top of the Rear Body Assembly and
the Door inside. Poke the fasteners through the Weatherstrip,
and loosely fasten the Door Stop and Door. Center the Door
on the Rear Body Assembly, then tighten the bolts (
see
Figure 3.).
Figure 2. Weatherstripping Rear Body Assembly Figure 3. Door Stop and Door to Body Assembly
Weatherstrip
(cut from bulk)
Rear Body
Assembly
Door Stop
Door
Assembly
1/4-20 x 5/8"
Hex Head Bolt
(3 places)
1/4-20 Nylon
Lock Nut
(3 places)
Rear Body
Assembly
2