WEATHER GUARD 1915 - Manual (Page 4)

WEATHER GUARD® products are protected by one or more of the following trademarks:
U.S. - 842268, 1661625, 1663369, 1750034, 2228051, 2291111, 2362167; Canada - 282725; U.K. - 1400720; N.Z. - 296049; Aus. - 761964
other trademarks pending.
- NOTICE -
Any modification or unintended use of this product shall immediately void all manufacturers warranties.
Manufacturer disclaims all liability for injuries to persons or property resulting from any modification to, or
unintended use of this product.
Hook "J" bolt
to the Bed Lip
"J" Bolt
supplied
with box
Bed Lip
Mounting Pad
Supplied
with Box
Cross, Saddle, and Side Box Mounting Procedure
If a truck mounted box is to be used with the Protect-A-Rail,
use the 3/16" thick shims that are provided along with the
2" Mounting Pads that were cut off in Step 1. This will insure
a level mounting of the box. Make sure the box cover(s) can
be fully opened without hitting the louvered Protect-A-Rail.
Check to make sure all fasteners are tight.
Fasteners
Supplied
with Box
Cab
Protector
Shim Pad
Shim (3/16")
Knaack LLC
ATTN: Warranty Claims
420 E. Terra Cotta Avenue
Crystal Lake, IL 60014
If you have any questions, please call toll free at 1-800-456-7865.
©2013 Knaack LLC
Part No. 24-0094 REV. C ECN 5285 03/13