AMX NXD-CV7 - Manual (Page 92)

Upgrading Modero Firmware
84 7" Modero Widescreen Touch Panels
10. Click the Reboot Device checkbox. This causes the touch panel to reboot after the firmware
update process is complete. The reboot of the panel can take up 30 seconds after the firmware
process has finished.
11. Click Send to begin the transfer. The file transfer progress is indicated on the bottom-right of
the dialog (FIG. 75).
12. Click Close (after the panel reboots) to return to the main program.
13. Right-click the associated System number and select Refresh System. This causes a refresh of
all project systems, establishes a new connection to the Master, and populates the System list
with devices on your particular system.
14. Confirm the panel has been properly updated to the correct firmware version.
FIG. 75 Send to NetLinx Device dialog (showing Modero firmware update via IP)
Selected Firmware file Description field for selected KIT file
Device and System values
must match the System and Device values
listed in the Workspace window
Firmware download
status